topic Re: Analytical Model for ramp in Revit Structure Forum

Analytical Model for ramp

wassel.eng — Thu, 23 Aug 2018 21:05:31 GMT

I have modeled this tow slabs then the ramp using structural floor in level 2

then used "modify sub element" to add the slope to it

is there any way that I can add also slope to analytical model and attach it to level 1 on one end???

Thanks,

Re: Analytical Model for ramp

erik_snell — Fri, 24 Aug 2018 02:43:28 GMT

Floor Analytical models assume flat floors. Actually the floor will provide warnings if the slope is excessive. Unfortunately I do not know of a work around.

Re: Analytical Model for ramp

wassel.eng — Sat, 25 Aug 2018 06:34:09 GMT

Using the slope arrow the analytical model is sloped as well but it still not attached to level 1 slab and using this solution the model as well is not attached.

actually attaching the analytical model will help very much during analysis so I hope you have any way that I can do that.
Thanks,

Re: Analytical Model for ramp

teodorb — Sat, 25 Aug 2018 18:34:27 GMT

Hi @wassel.eng,

Please check out this thread. It might help you.

https://forums.autodesk.com/t5/revit-structure-forum/align-analytical-slab-to-modified-sub-element-slab/m-p/8220002#M27949

Kind regards,