https://forums.autodesk.com/t5/revit-structure-forum/node-connection/m-p/8466707#M28172 <P>Hello to everyone,</P> <P>&nbsp;</P> <P>I am at the moment having some doubts about the node connection between the beam taht is being shown at the picture and the retaining wall. Is this the ritgh way (See picture "node connection")? I have been doing this way... see picture (node connection 2)</P> <P>BEST REGARDS</P> Thu, 13 Dec 2018 18:58:26 GMT Anonymous 2018-12-13T18:58:26Z https://forums.autodesk.com/t5/revit-structure-forum/node-connection/m-p/8466707#M28172 <P>Hello to everyone,</P> <P>&nbsp;</P> <P>I am at the moment having some doubts about the node connection between the beam taht is being shown at the picture and the retaining wall. Is this the ritgh way (See picture "node connection")? I have been doing this way... see picture (node connection 2)</P> <P>BEST REGARDS</P> Thu, 13 Dec 2018 18:58:26 GMT https://forums.autodesk.com/t5/revit-structure-forum/node-connection/m-p/8466707#M28172 Anonymous 2018-12-13T18:58:26Z https://forums.autodesk.com/t5/revit-structure-forum/node-connection/m-p/8494174#M28173 <P>For construction model is ok the second one but if this model will be use for structural analysis you need to connect your wall with your beam and check if your analytical model connect correctly.</P> Mon, 31 Dec 2018 21:01:23 GMT https://forums.autodesk.com/t5/revit-structure-forum/node-connection/m-p/8494174#M28173 Luiscko 2018-12-31T21:01:23Z