https://forums.autodesk.com/t5/revit-structure-forum/section-box/m-p/8468344#M28152 <P>Hello,</P> <P>&nbsp;</P> <P>I am at the moment having some doubts about the rebar that composes the retaining walls, and I need to select them. My question is, can I isolate this ones? My first ideia was to create a "void" inside the section box, like you see thought the picture, because the filter option doesnt work, because it selects all the rebar, it doesn´t differentiate between the wall rebar or the foundations rebar. Any thoughts?</P> <P>&nbsp;</P> <P>best regards</P> Fri, 14 Dec 2018 12:51:51 GMT Anonymous 2018-12-14T12:51:51Z https://forums.autodesk.com/t5/revit-structure-forum/section-box/m-p/8468344#M28152 <P>Hello,</P> <P>&nbsp;</P> <P>I am at the moment having some doubts about the rebar that composes the retaining walls, and I need to select them. My question is, can I isolate this ones? My first ideia was to create a "void" inside the section box, like you see thought the picture, because the filter option doesnt work, because it selects all the rebar, it doesn´t differentiate between the wall rebar or the foundations rebar. Any thoughts?</P> <P>&nbsp;</P> <P>best regards</P> Fri, 14 Dec 2018 12:51:51 GMT https://forums.autodesk.com/t5/revit-structure-forum/section-box/m-p/8468344#M28152 Anonymous 2018-12-14T12:51:51Z https://forums.autodesk.com/t5/revit-structure-forum/section-box/m-p/8468553#M28153 <P>what if you turn off the foundations in the view so they are not visible</P> <P>then</P> <P>with having only the walls and wall rebars visible, change the wall transparency to 40% so you can see thru them</P> <P>then</P> <P>select everything and filter by rebar</P> <P>&nbsp;</P> Fri, 14 Dec 2018 14:17:12 GMT https://forums.autodesk.com/t5/revit-structure-forum/section-box/m-p/8468553#M28153 corkybenle1 2018-12-14T14:17:12Z