topic Re: Filter Element on Named Ref Plane in Revit Structure Forum

Filter Element on Named Ref Plane

MartinGTE — Tue, 23 Jul 2024 11:22:54 GMT

I have some beams on a named reference plane but cannot seem to be able to filter them. Is there a way of doing this?

Re: Filter Element on Named Ref Plane

jay_colc — Tue, 23 Jul 2024 16:05:11 GMT

You cannot use the Reference Level in a Filter therefore you would been to use something more specific such as a Specific Offset from Level Value possibly with a Level Reference (not sure though on this one)

Or alternatively or a Does Not Equal a Level value

A good one for a Revit Idea for Structural Discipline

Re: Filter Element on Named Ref Plane

handjonathan — Mon, 29 Jul 2024 11:22:20 GMT

Hi @MartinGTE

Thanks a lot for posting your question to the forums!   Has the solution suggested by @jay_colc helped with your issue?
 
We look forward to hearing back from you with more information so we can help you as a community! 

Re: Filter Element on Named Ref Plane

MartinGTE — Tue, 30 Jul 2024 06:03:44 GMT

No as I have too many offset levels that I would have to set filters up for. A simple named ref plane filter would do it in one.

Re: Filter Element on Named Ref Plane

jay_colc — Tue, 30 Jul 2024 11:06:06 GMT

I have supported this Idea