Issues with IfcSite and miter modified structural framing

MartinSpence — Wed, 25 Sep 2019 13:01:52 GMT

Hi all,

I've posted this at the sourceforge ifc general discussion forum as well.

Link here.
I'm experiencing some trouble exporting structural framing from Revit 2019.1, which has been modified using the Miter function from the Steel tab. The problem is, that when a beam is modified using this funtion, it will no longer respond to the "Include IfcSite" option when exported to Ifc.
I was wondering if anyone else has experienced the same as me, and whether or not there's a fix for this.

I've made a small use case for demonstration:
In Revit I've made two sets of beams. One set modified with the miter function and one unmodified. The project elevation is repositioned, to 5000 mm above startup location.

After this, I exported 2 Ifc-files: One with IfcSite, and one without:

As the image depicts, the Mitered beam sets are place on top of each other, and disregards the IfcSite upon export.

Any help will be most welcomed.

Cheers,
Martin

Re: Issues with IfcSite and miter modified structural framing

MartinSpence — Mon, 30 Sep 2019 09:41:48 GMT

This issue was solved on the SourceForge IFC forum. See here for the answer.

Regards, Martin

topic Re: Issues with IfcSite and miter modified structural framing in Revit Structure Forum

Issues with IfcSite and miter modified structural framing

Re: Issues with IfcSite and miter modified structural framing