topic Re: Can rebar form a different angle with beam in Revit ? in Revit Structure Forum

Can rebar form a different angle with beam in Revit ?

Anonymous — Tue, 19 May 2020 07:53:49 GMT

I want to adjust the angle between rebar and beam like the inclined stirrups in the attached image.

So far I can not find any properties to change this angle, the rebar seems to always form a 90 degree with the selected beam.

Does anyone have any ideas to make this happen in Revit ?

Ahmed_M_Heteba — Tue, 19 May 2020 10:52:52 GMT

hi you can do it using the steps belwo :

1 . draw the beam and sections like pic 1

2. go to longitudinal section and draw reference plane an name it like pic 2

3. go to cross section and set work plane to the inclined refrence plane you draw and draw your stirups and adjust the constraint like pic 3

ovidiu_paunescu — Tue, 19 May 2020 11:42:55 GMT

Hi @Anonymous

You can use @Ahmed_M_Heteba , but don't copy the stirrup that you have sketched.

Instead, select the stirrup, click the varying rebar set button and then change the layout > Max spacing or some other option.

Ahmed_M_Heteba — Tue, 19 May 2020 17:20:12 GMT

yes i forgot the step of varying rebar

also make the stirrups maximum spacing or no with spacing

Ahmed_M_Heteba — Thu, 21 May 2020 21:12:57 GMT

did it work with you?