topic Re: How to create a Ribbed Slab in Revit Structure Forum

How to create a Ribbed Slab

roquealfonso — Sun, 24 May 2020 03:36:07 GMT

I need to model elements that are embedded inside the floor/slab, but these elements must cut or create a void in the slab/floor. I can't use the shaft option, because I need to also make a count of these elements. I have attached pictures of the floor plan and section.

Re: How to create a Ribbed Slab

L.Maas — Sun, 24 May 2020 10:03:04 GMT

Pleas do not double post in multiple forums. Other thread HERE in Revit Architecture forum

Re: How to create a Ribbed Slab

awes — Sun, 24 May 2020 11:55:06 GMT

One suggestion. Make a void family based on a generic model face based family template. Add parameters to describe dimensions of the void family. Add parameter for volume =h x b x t. Remember to check family parameter "cut with void when inserted". Use a view with view direction up to insert void family.

Re: How to create a Ribbed Slab

Ahmed_M_Heteba — Sun, 24 May 2020 15:37:34 GMT

i model it using this steps :

1. i use beam system for ribs modeling

2. i use floor for compression slab

3. i use floor for slab edge (Solid parts)

4. i use model in place or generic family to model the blocks