topic Re: Problems placing rebar in Revit Structure Forum

Problems placing rebar

Anonymous — Thu, 05 Nov 2020 06:20:57 GMT

Hi everyone. I'm new with Revit Structure. I was doing fine but in this project I´m having trouble with rebar placing in columns. First of all I wasn't able to place rebar in any column, I was having the same problem you'll see in the video, the cursor will become a circle (with any placement plane) and I won´t be able to place the rebar. I erased the floor, and I was able to place the rebar! But not in some columns. Then I separated the remaining columns from the walls and I was able to place the rebar (see the images). Any idea what's happening or what I'm doing wrong?

Can´t place rebar

I separate the walls from the column and now I can

Re: Problems placing rebar

Jamhmer_Oc — Thu, 05 Nov 2020 20:33:35 GMT

There is some restriction in the upper part so this option is deactivated and you will not be able to place reinforcement.

You have to make a cut to the column and just place rebar.

Re: Problems placing rebar

ghadeer.a.shaheen — Thu, 25 Nov 2021 22:12:41 GMT

What can I do in order to remove that restriction and be able to place my bars?

Thanks in advance.

Re: Problems placing rebar

ovidiu_paunescu — Tue, 07 Dec 2021 11:10:22 GMT

Hi @Anonymous

You need to cut a section through the column and place in that section in the current work plane.

To do that, first create a column elevation (section looking at the column side) and then a detail section cutting through the column.

Re: Problems placing rebar

semi — Tue, 11 Jan 2022 09:49:24 GMT

When you wanted to place your stirrup when you couldn't, you were only placing 1 stirrup where you are cutting yout geometry (your walls in this case), try using the maximum spacing option and give it the required spacing, then it'll work.

Do know the stirrups will also run through your wall this way because you are joining structural geometry together making the cover join the wall and columns/beams as well.

Very annoying in Revit but it is what it is.