topic PAINEL SCHEDULE: SUM OF THE LOAD IN VA AND WATTS in Revit MEP Forum

PAINEL SCHEDULE: SUM OF THE LOAD IN VA AND WATTS

PEDROVITOR.PAGLIARIN — Wed, 13 Sep 2023 14:29:30 GMT

I'm having some trouble formulating and for edit a painel shedule for Revit eletrical. Im uploading a print of the screen to be clearly. The question si, how i can use Revit formulas to sum all the load in VA and in Watts, at the end of the table?

I tried to use this formula:
=SUM(Table.Loads.Power)

but the "=" and the "SUM" are giving some trouble to my formula

Anyone could help?

Re: PAINEL SCHEDULE: SUM OF THE LOAD IN VA AND WATTS

fabiosato — Thu, 14 Sep 2023 13:56:23 GMT

Hello,

You can get these values using one of the marked commands.

Re: PAINEL SCHEDULE: SUM OF THE LOAD IN VA AND WATTS

npsconsultingllc — Fri, 15 Sep 2023 16:46:21 GMT

Wouldn't it make more sense to do a single calculated parameter at the bottom of the schedule for VA or Watts instead of having both VA & Watts?

Agree with the above either way. A Calculated parameter with a formula would work and probably have the power factor at the device so that it automatically calculates based on the input Watts & PF.

Re: PAINEL SCHEDULE: SUM OF THE LOAD IN VA AND WATTS

r63501736 — Tue, 26 Sep 2023 14:31:55 GMT

Do you know how to make the formula for this situation? this one didnt work: SUM(Table.Loads.Power)

Re: PAINEL SCHEDULE: SUM OF THE LOAD IN VA AND WATTS

fabiosato — Wed, 27 Sep 2023 02:16:54 GMT

Hello,

You have the Total Load parameters from the Electrical Equipment.