topic Re: Revit MEP - Reducing Tee Generic in Revit MEP Forum

Revit MEP - Reducing Tee Generic

pgauntt — Mon, 20 Aug 2012 21:28:48 GMT

Hello,

I realize that there have been many posts about the lack of a generic reducing tee for copper pipe. I have made many piping models and as all of you well know, tees are created as standard tees then with reducers to change pipe sizes. After doing some research on other fittings, it appears that I must create my own parameters and look-up tables to create a simple reducing tee. Is this accurate or did I miss something? Any suggestion, solutions of content would be greatly appreciated.

Phil G

Re: Revit MEP - Reducing Tee Generic

alan.quinn — Wed, 22 Aug 2012 17:59:59 GMT

Here's a link that will help you. Look at the last response in the thread http://forums.autodesk.com/t5/Autodesk-Revit-MEP/Can-anyone-help-creating-a-reducing-tee-pipe-fitting-for-Revit/td-p/2747448

I also suggest that you post leaving feedback at the below link. Information gathered is used to improve the application.

Product Contact Link: http://usa.autodesk.com/adsk/servlet/index?siteID=123112&id=1109794

Thanks for posting.

Re: Revit MEP - Reducing Tee Generic

gurunathSLXR2 — Thu, 10 Aug 2023 16:11:44 GMT

Need help in creating reducing TEE in generic model

Re: Revit MEP - Reducing Tee Generic

iainsavage — Thu, 10 Aug 2023 18:35:49 GMT

There is a variety of reducing tees in the UK libraries:

Malleable iron, threaded:

Carbon steel, welded:

Copper, soldered:

...and many more.

You should be able to copy them, adjust dimensions in the lookup tables etc.

I don't know if there are imperial equivalent families.