topic CONDUIT PROBLEMS in Revit MEP Forum

CONDUIT PROBLEMS

Anonymous — Tue, 20 Jun 2017 17:36:54 GMT

I am having trouble connecting two wall mounted junction boxes with conduit. It states "The routing solution failed because there is no default fitting type specified or the fitting cannot be found in the project. Ensure the fitting is loaded in the project and try again." how can i fix this problem and connect my two junction boxes with conduit.

Re: CONDUIT PROBLEMS

Anonymous — Wed, 21 Jun 2017 08:31:37 GMT

Hello @Anonymous

Alwasys ensure that the routing references are all set.

You have to set up all the fittings requires for your conduit (see image)

All those fittings are located in the libraries

Here is the sample fittings from libraries (see image)

Re: CONDUIT PROBLEMS

smbrennan — Wed, 21 Jun 2017 12:59:31 GMT

In addition to what Arjay said, check to make sure that the conduits are aligned. If they're a fraction off, Revit won't let you connect them.

Re: CONDUIT PROBLEMS

Anonymous — Tue, 27 Jun 2017 13:09:30 GMT

Hello,

Before doing anything make sure you're using the metric template.

If my answer solved your problem , Please Kudo and Accept as solution.

Thanks