topic Elevation Tag Questions on Duct & Duct Fittings in Revit MEP Forum

Elevation Tag Questions on Duct & Duct Fittings

mhillis — Tue, 29 Jan 2019 20:13:43 GMT

I have two questions about Elevation tags

1) How do I get Elevation tags to acknowledge Insulation on Duct? In the attached screenshot, you will see that I have some duct. The Elevation tag shows the bottom at 102"; however, this is to the bottom of the duct metal. The duct has 3 inches of insulation, so it should actually be showing T: 117" / B: 99" - how can I get Revit to display this properly?

2) How can I get elevation tags for Duct Fitting type Families?

Re: Elevation Tag Questions on Duct & Duct Fittings

ToanDN — Tue, 29 Jan 2019 20:26:35 GMT

Have you tried Spot Elevation?

Re: Elevation Tag Questions on Duct & Duct Fittings

mhillis — Wed, 30 Jan 2019 15:47:53 GMT

@ToanDN wrote:

Have you tried Spot Elevation?

Toan,

Nice, those are fairly effective. I think these can be useful to me.

Thanks!