topic Re: Problem with halftone in Revit MEP Forum

Problem with halftone

dirk_h — Mon, 08 Apr 2019 19:09:54 GMT

Hello,

I have following problem with the halftone option :

I've linked an architectural model to a MEP model as underlay. When I check in "visibility/grafics" -> "Revit Links" the option "halftone" and "underlay", not only the linked model but also the duct-fittings and the air terminals change to halftone (ducts are OK). This is not my intention. How to solve this?

Thans in advance!

Dirk

Re: Problem with halftone

RobDraw — Mon, 08 Apr 2019 19:23:48 GMT

This shouldn't be happening to the fittings.

Take a look at the V/G settings for the fittings and the terminals.

Can you please post a portion of the model that exhibits the behavior?

Re: Problem with halftone

dirk_h — Mon, 08 Apr 2019 20:54:53 GMT

Hey, Thanks, I think it is solved by reloading the model. But a problem appeared ; 1) an orange line appears on the architectural model in MEP. It seems to be the contour of the floor/roof???

Re: Problem with halftone

Anonymous — Tue, 09 Apr 2019 05:58:34 GMT

hi, set you link by custom and change the parameter to see where it is come from

or set the like by liked view

Re: Problem with halftone

dirk_h — Tue, 09 Apr 2019 16:26:12 GMT

"or set the like by liked view"......Sorry but I’m afraid I don’t follow you. The yellow boundary (floor/roof???) line is still there.

Re: Problem with halftone

RobDraw — Tue, 09 Apr 2019 16:29:07 GMT

It looks like a slab edge but you need to determine what it is by doing a tab select on it or by opening the architectural model.

Re: Problem with halftone

dirk_h — Tue, 09 Apr 2019 17:00:12 GMT

It seems to be a generic foor... see attachment

Re: Problem with halftone

Anonymous — Wed, 10 Apr 2019 07:55:50 GMT

disable the analytics