topic Pipe in plan view only shows cross line in Revit MEP Forum

Pipe in plan view only shows cross line

Anonymous — Fri, 08 May 2020 05:31:56 GMT

Some of the sanitary pipe in plan view only shows cross line as shown on picture.

I want the pipe all shows like this.

How can I solve this problem?

L.Maas — Fri, 08 May 2020 08:01:25 GMT

Check the detail settings of your view (fine, medium or coarse) and check your ris/drop symbol settings for your system.

This might be different for sanitary than for some of your other systems

waldo9QBRP — Wed, 06 Sep 2023 06:42:30 GMT

Hi L.Maas,

Is it possible to remove the cursor/plus, instead of the rise/drop symbol?

Or is it possible to adjust the line thickness of the cursor?

craigjonnson — Wed, 06 Sep 2023 07:03:15 GMT

What are your cut line weights set to within your visual graphics > Object styles? Change your centreline to 1 if its any number above that.

waldo9QBRP — Wed, 06 Sep 2023 07:12:26 GMT

Hi craigjonnson,

Your respence is highly appreciated.

The centre line was thick even if the pipe were not cut.

regards,

Mahmoud.Ziedan — Wed, 06 Sep 2023 07:50:11 GMT

@waldo9QBRP Pipes are not cuttable elements.so they just have projection line weight

iainsavage — Wed, 06 Sep 2023 09:43:39 GMT

@waldo9QBRP wrote:
The centre line was thick even if the pipe were not cut.

Adjust the overrides for rise drop symbols:-

fabiosato — Tue, 12 Sep 2023 13:27:59 GMT

Hello,

In visibility/graphics overrides, hide the centerline.