topic Re: Switchboard Panel Schedule: show Estimated Demand in 'circuit area' of panel schedule in Revit MEP Forum

Switchboard Panel Schedule: show Estimated Demand in 'circuit area' of panel schedule

dtiemeyer — Wed, 04 May 2022 17:46:23 GMT

In the Switchboard schedule that ships with Revit, it displays the Connected Load for each of the loads. How can I show the Estimated Demand load in that area?

Editing the panel schedule template, Estimated Demand not available from list. How can I get to it?

Re: Switchboard Panel Schedule: show Estimated Demand in 'circuit area' of panel schedule

mpeperkamp — Thu, 05 May 2022 13:23:16 GMT

Hi @dtiemeyer ,

The Estimated Demand parameter is not applicable for electrical circuit in panel schedule.

This parameter is only accessible for Electrical Equipment.

So you can get the total of all circuits with the parameter Estimated Demand, but not at circuit level.

If my post answers your question, please click the "Accept as Solution" button. This helps everyone find answers more quickly!

Re: Switchboard Panel Schedule: show Estimated Demand in 'circuit area' of panel schedule

dtiemeyer — Thu, 05 May 2022 19:07:04 GMT

But in a Switchboard schedule, the 'circuits' are other panels or transformers, which are Equipment that have resolved their Demand Factor already.