topic Re: Roof Plan-Gable issue in Revit Architecture Forum

Roof Plan-Gable issue

mmward — Tue, 19 Oct 2021 19:14:02 GMT

I am replicating an AutoCad drawing into Revit, and I am running into problems regarding the roof. There is a large gable on the rear of the house, but Revit is not allowing me to create this. I have attached the desired elevation, roof plan, and my current situation in Revit.

Re: Roof Plan-Gable issue

barthbradley — Tue, 19 Oct 2021 19:38:17 GMT

Post the DWG.

Re: Roof Plan-Gable issue

mmward — Tue, 19 Oct 2021 19:43:46 GMT

Attached are the elevations with roof plan.

Re: Roof Plan-Gable issue

barthbradley — Tue, 19 Oct 2021 19:46:16 GMT

what about the Roof Plan too?

Re: Roof Plan-Gable issue

mmward — Tue, 19 Oct 2021 19:48:11 GMT

It's all in the same file.

Re: Roof Plan-Gable issue

barthbradley — Tue, 19 Oct 2021 19:51:51 GMT

afraid not.

Re: Roof Plan-Gable issue

mmward — Tue, 19 Oct 2021 19:52:54 GMT

Let's try that again...

Re: Roof Plan-Gable issue

barthbradley — Tue, 19 Oct 2021 20:28:34 GMT

You can get there (for the most part) by using Slope Arrows.

Create a Roof Slope Using Slope Arrows | Revit LT | Autodesk Knowledge Network

Re: Roof Plan-Gable issue

mmward — Wed, 20 Oct 2021 12:32:19 GMT

Got it!! Thanks so much for the advice. The roof was still extending below the roof level, but realized I needed to change the "plate offset from base" in a couple of places to make it work.

Re: Roof Plan-Gable issue

carlusremod — Mon, 12 Sep 2022 19:41:19 GMT

The Owner Dashboard is a personalized view of your home and suggests you stats like how many humans are viewing your list, gives you easy access to edit your property records, and more.