topic Re: DYNAMO BASIC HELP PLEASE in Revit Architecture Forum

DYNAMO BASIC HELP PLEASE

CLMSJ — Tue, 26 Oct 2021 15:57:17 GMT

Hi,

I have created a dynamo script that gives x and y coordinates to piles in my revit file. These values then appear in the schedule as shown in the screenshot. How do i convert it to show as metres and to only 3 decimal places?

Someone else told me to use math nodes but i am new to dynamo and not sure how to use them. Any help would be much appreciated or a point in the right direction on how to use basic math nodes.

Re: DYNAMO BASIC HELP PLEASE

rodrigo.bezerra — Tue, 26 Oct 2021 17:36:16 GMT

If MSJ-X and Y are shared parameters design to receive number information, you don't have to tackle decimal places in Revit: just adjust the unit settings for the parameter in the schedule.

Re: DYNAMO BASIC HELP PLEASE

RDAOU — Tue, 26 Oct 2021 17:55:57 GMT

@CLMSJ

You can do one of the following:

either Change project units (Length to meters) run the graph then Change the Project units back to millimeters (Then repeat this process every time you want to update the coordinates. which is pretty much tidious and could end up with a mishmash of mm and m)
OR you can leave the project units be (in mm) and do the conversion of the coordinates to m simply by dividing the output by 1000!!!

DYN Attached

Re: DYNAMO BASIC HELP PLEASE

CLMSJ — Wed, 27 Oct 2021 08:20:31 GMT

Excellent! thank you! How do you make it round to 3 decimal places only using dynamo? (many thanks for the screenshot of dynamo, helps a lot!)

Re: DYNAMO BASIC HELP PLEASE

RDAOU — Wed, 27 Oct 2021 09:27:34 GMT

@CLMSJ

The Code block highlighted below is what controls the rounding ... it is set to 3 Digits as it is now

Re: DYNAMO BASIC HELP PLEASE

CLMSJ — Wed, 27 Oct 2021 09:36:16 GMT

Yeah i have got that in, but as you can see top right in the schedule, there is still 10 decimal places?

Re: DYNAMO BASIC HELP PLEASE

RDAOU — Wed, 27 Oct 2021 09:55:09 GMT

@CLMSJ

Works fine here... try remove the project parameters and add them back

Re: DYNAMO BASIC HELP PLEASE

CLMSJ — Wed, 27 Oct 2021 10:48:47 GMT

Still not working for me? is it because the parameter is set as a text parameter?

Re: DYNAMO BASIC HELP PLEASE

RDAOU — Wed, 27 Oct 2021 10:57:22 GMT

@CLMSJ

Nope ...text has nothing to do with that...if you are using the same revit file you attached, the numbers in the image you posted are wrong

Did you delete and recreate the Parameters and added to structural foundation?
In the DYN add a watch node as shown below. this will show you the figures which should be in the parameters

Re: DYNAMO BASIC HELP PLEASE

CLMSJ — Wed, 27 Oct 2021 11:06:02 GMT

Yes im not sure what i have missed here?

Re: DYNAMO BASIC HELP PLEASE

CLMSJ — Wed, 27 Oct 2021 11:35:24 GMT

revit file attached

Re: DYNAMO BASIC HELP PLEASE

RDAOU — Wed, 27 Oct 2021 11:59:01 GMT

@CLMSJ

Well nothing wrong in the files you attached...See GIF below.

Make sure you are running the graph in the right Revit model

Re: DYNAMO BASIC HELP PLEASE

CLMSJ — Wed, 27 Oct 2021 12:05:06 GMT

Very strange it isnt working my end 😞

Maybe there is a dynamo or revit update i need to do

Re: DYNAMO BASIC HELP PLEASE

CLMSJ — Wed, 27 Oct 2021 12:11:29 GMT

There is a few updates i need to do so hopefully will sort my problem.

One other thing i am wondering with this auto coord dynamo script is that it works from the internal origin of revit? if thats the case, when i loads in a CAD survey file and relocate my survey point in revit so it matches the survey grids of the CAD file, will that mean the dynamo script will not work?

Re: DYNAMO BASIC HELP PLEASE

RDAOU — Wed, 27 Oct 2021 12:52:48 GMT

@CLMSJ

The survey point is not relocated... What gets relocated is the Internal origin and the Project base point...the survey point remains put Sea Level 0,0,0

If you need to relocate the survey point for it to serve as a site benchmark, you

first UNCLIP it
Relocate
Then Clip it Again at the new position

Re: DYNAMO BASIC HELP PLEASE

CLMSJ — Wed, 27 Oct 2021 16:08:15 GMT

Hello again! nearly there! I managed to get the coords working by upgrading it to revit 2020 from revit 2019. The issue im having now is moving the survey point. I have linked a CAD file in and when i click aquire coordinates from the cad file, the survey point shoots far away (which it should) and i can put coordinates tags on the cad file and they show the correct real world coordinates. However when i run the dynamo coord script again, nothing changes and i think it is because it is reading from the revit internal hidden main origin? is there a way to get around this?

Re: DYNAMO BASIC HELP PLEASE

CLMSJ — Wed, 27 Oct 2021 16:09:34 GMT

Image of coords after i have aquired coordinates from the CAD file

Re: DYNAMO BASIC HELP PLEASE

CLMSJ — Mon, 01 Nov 2021 10:36:42 GMT

Any help on resolving this coord issue would be much appreciated, i am nearly there with it now i just need to coords in the dynamo script to read from the survey marker and not the internal origin, if thats possible?

Re: DYNAMO BASIC HELP PLEASE

RDAOU — Mon, 01 Nov 2021 14:53:11 GMT

@CLMSJ

The OOTB way is to transform Geometry of the piles from the one cs to the other (ie: from Base Point or IO to Survey)

Alternatively, if you do not want to do a complete makeover to the Dynamo graph you are using already, Download a package called Genius Loki which has the following node.

The revised .dyn is also attached

Re: DYNAMO BASIC HELP PLEASE

CLMSJ — Fri, 05 Nov 2021 09:50:39 GMT

Brilliant, thanks so much! i will test this out when i get some free time 🙂