topic Beam changes tro line in plan view. in Revit Architecture Forum

Beam changes tro line in plan view.

racinc19 — Sat, 20 Nov 2021 18:58:24 GMT

I locate a beam {14" BCI I Jiost) on a plan view. When I use cut geometry the beam becomes a line only visible in coarse view. The beam is visible and fine in 3D, elevation, and sections.

A GluLam beam does not have this issue?

Thanks in advance.

Re: Beam changes tro line in plan view.

barthbradley — Sat, 20 Nov 2021 19:06:05 GMT

Change the View Detail Level to Medium or Fine

It's the typical Coarse View representation. Symbolic Line only. If you want the geometry visible in Coarse, then edit the Family and change its Visibility Settings.

Re: Beam changes tro line in plan view.

racinc19 — Sat, 20 Nov 2021 20:16:09 GMT

Thank you for the reply. The line is only visible in coarse. Medium or Fine settings remove visibility completely.

Re: Beam changes tro line in plan view.

racinc19 — Sat, 20 Nov 2021 20:24:38 GMT

I changed the visibility setting in the family editor show in plan was unchecked.