topic Re: How can i adjust the wall according to green shape in Revit Architecture Forum

How can i adjust the wall according to green shape

kalktika — Tue, 12 Apr 2022 18:29:47 GMT

Im trying to shape the wall as it is in green.

Re: How can i adjust the wall according to green shape

barthbradley — Tue, 12 Apr 2022 18:52:32 GMT

Clip the edge with a In-Place Void cut and then place a Wall Type that contains only the Finish Layers along the clip angle. Then use Join Geometry.

Re: How can i adjust the wall according to green shape

ToanDN — Tue, 12 Apr 2022 18:42:41 GMT

Several ways:

- add a vertical wall sweep with a custom profile

- model an in place void and cut the wall with it

- crate an opening family with voids that cut the wall to that shape (if it occurs at multiple openings)

Here is an example of using a wall sweep with a custom profile. Your profile should be half of it and placed right at the end of the wall.

Re: How can i adjust the wall according to green shape

kalktika — Tue, 12 Apr 2022 19:37:48 GMT

It gives me this error
Some Void Forms of this family do not cut anything and will be deleted. To make a Void Form cut something else use the Cut Geometry tool.

Re: How can i adjust the wall according to green shape

barthbradley — Tue, 12 Apr 2022 19:50:45 GMT

Go to Plan View. Activate Model In-Place (Architecture tab). Choose Void Extrusion and sketch the Profile. Finish and adjust the Extrusion Start/End Parameter values as necessary. Now use Cut Geometry tool to cut the Wall with the Void Extrusion. Close out of Model In-Place when done.

Just to be clear: you need to cut the wall with the void BEFORE exiting Model In-Place.

Note: this only works on system families. Is the wall a system family wall?

Re: How can i adjust the wall according to green shape

ToanDN — Tue, 12 Apr 2022 19:58:42 GMT

See screencast.