topic Re: Slanted Wall and Floor in Revit Architecture Forum

Slanted Wall and Floor

momo8 — Wed, 18 Dec 2024 17:00:03 GMT

Dears,

I am modeling a small tower with 2 slanted walls. I am using Revit LT 2025. As soon as I add the floor from level 4 on, the slab is no more aligned with the slanted wall but it is sticking out. See attached image of the section.

Any idea how to solve this?

best

Re: Slanted Wall and Floor

RDAOU — Wed, 18 Dec 2024 20:53:16 GMT

@momo8

The floors will not shrink on their own.

Êither You need to visit the floor plan view of each level where the slab/floor pops out, edit the floor element and aligne its profile lines with the wall.
Or use a void to cut them all at once

Re: Slanted Wall and Floor

momo8 — Wed, 18 Dec 2024 20:26:37 GMT

I see,

thank you for your feedback. A bit unconvinient as process though...

Re: Slanted Wall and Floor

RDAOU — Wed, 18 Dec 2024 20:55:11 GMT

@momo8

You are most welcome... Sadly I have to say those are the easiest solutions avaiable 🙂 there are more complicated ones some of which might require redoing the whole work from scratch but I guess those are even more inconvinient

Cheers