topic Re: Wall lines/boundaries not accepting override in Revit Architecture Forum

Wall lines/boundaries not accepting override

cbt990 — Fri, 26 Aug 2022 18:33:56 GMT

How do I hide the black line?

Re: Wall lines/boundaries not accepting override

cbt990 — Fri, 26 Aug 2022 18:34:43 GMT

Override host layers > check "Cut Line Styles"

Re: Wall lines/boundaries not accepting override

barthbradley — Fri, 26 Aug 2022 18:38:30 GMT

Some other override is in place. Maybe Phase Filter Graphic Override. Set Phase Filter to Show Complete.

https://knowledge.autodesk.com/support/revit/learn-explore/caas/CloudHelp/cloudhelp/2020/ENU/Revit-DocumentPresent/files/GUID-67D3D6DB-E78D-4711-B9C3-4D30F1C22205-htm.html

Re: Wall lines/boundaries not accepting override

barthbradley — Fri, 26 Aug 2022 18:52:28 GMT

Wait a minute. What are we talking about in your screenshot? That thick black line at the corner return? What is it? Wall end?

...You didn't by chance use the LW tool on that line; did you?

Re: Wall lines/boundaries not accepting override

ToanDN — Fri, 26 Aug 2022 20:40:31 GMT

Use Linework tool and apply <By Category> style to that line.

Re: Wall lines/boundaries not accepting override

barthbradley — Fri, 26 Aug 2022 21:00:38 GMT

Just in case you are unfamiliar with the Linework Tool (maybe someone else modified that line), it's located on the Modify Tab.

Re: Wall lines/boundaries not accepting override

barthbradley — Fri, 26 Aug 2022 21:29:58 GMT

Cut Line Style? How were you able to get Cut Line Style to affect only that one wall end? Or were you not talking about that thick black line at the upper-left corner?

Re: Wall lines/boundaries not accepting override

cbt990 — Fri, 26 Aug 2022 21:31:56 GMT

I was, and when I checked it the lines went away!

Re: Wall lines/boundaries not accepting override

barthbradley — Fri, 26 Aug 2022 21:54:29 GMT

Okay, I get what's going on now. The Projection Line Weight is greater than the Cut Line Weight.

You can also correct by making Projection and Cut the same weight.