topic Re: Curtain Wall Mullions in Revit Architecture Forum

Curtain Wall Mullions

bimitaly — Mon, 12 Sep 2022 07:18:37 GMT

Hi,

I Have to create Horizontal mullion and on the top of it vertical mullions in a sloped Glazing roof. if create like the way one of the mullion getting spacing either horizontal one or vertical one which is i don't want. i tried may ways and checked the option but i couldn't make it.

For better understanding see the attached snip.

i need to make both mullions continues.

Thank you.

Regards,

Satya Adabala.

Re: Curtain Wall Mullions

ToanDN — Mon, 12 Sep 2022 08:46:56 GMT

Stack two sloped glazing roofs, one with hor million, one with vertical mullions. Or stack two beam systems.

Re: Curtain Wall Mullions

hmunsell — Mon, 12 Sep 2022 14:57:32 GMT

Mullions in a curtain wall have a priority, there are 4 default options to choose from. Once set, you can modify each intersection manually if needed. BUT one always has priority over the other. Only other option is do as @ToanDN suggests.

Re: Curtain Wall Mullions

bimitaly — Wed, 14 Sep 2022 12:25:38 GMT

Thanks for your reply.

Actually i can't make two wall system. however i'll try to use stack two beam system.

if i encounter with any new issue i'll get back to you

Thank you.