topic Re: How to break wall sweep/baseboard at different rooms in Revit Architecture Forum

How to break wall sweep/baseboard at different rooms

lorissa — Thu, 10 Nov 2022 00:12:45 GMT

I have two rooms, but when I draw in the baseboard as a wall sweep, it goes through the wall. Also, as the baseboard in the bathroom is tile, and the baseboard in the main space is wood, how do I separate these?

Re: How to break wall sweep/baseboard at different rooms

ToanDN — Thu, 10 Nov 2022 00:14:55 GMT

Split the wall between rooms. Or, use grips to stretch the wall sweep.

Re: How to break wall sweep/baseboard at different rooms

barthbradley — Thu, 10 Nov 2022 02:35:22 GMT

I don't see the baseboard going through the wall. I see the baseboard on the face of the wall below what appears to be a window. The baseboard is within the view range. You're looking down from the cut plane to the floor; right?

Re: How to break wall sweep/baseboard at different rooms

barthbradley — Thu, 10 Nov 2022 02:46:50 GMT

Actually, there way too much linework in that view. What's going on? Did you apply a transparency?

Re: How to break wall sweep/baseboard at different rooms

tomas.polakCMEY6 — Thu, 10 Nov 2022 08:13:38 GMT

Check out this tutorial, it might help you:

https://youtu.be/pkYIqua0XR0

Tom