topic Re: Area Plans in Revit Architecture Forum

Area Plans

ZoiStathaki1 — Wed, 14 Dec 2022 04:24:32 GMT

Hello,

Could someone explain the advantages of why choosing Area Plans over Floor plans?

I would like to take measurements for client such as Gross Sellable Area, Gross Buildable Area, and Gross Floor Area. In principle I am thinking of Area Plans instead of Floor plans, because I can draw my boundary lines <area lines> where I would like to and after that create Area schedules too.

Re: Area Plans

ToanDN — Wed, 14 Dec 2022 04:49:08 GMT

Area plans are more flexible for areas because area boundary can be different from wall boundary + you can apply area rules. You can also have multiple area schemes for different type of area plans and calculations.

Re: Area Plans

barthbradley — Wed, 14 Dec 2022 05:05:43 GMT

@ZoiStathaki1 wrote:

Could someone explain the advantages of why choosing Area Plans over Floor plans?

You don't choose Area Plans over Floor Plans. You do both.

Re: Area Plans

ZoiStathaki1 — Wed, 14 Dec 2022 06:38:18 GMT

Understood.

@barthbradley could you elaborate a little bit more ? I will do Area Plans to take Area Measurements (which are requested from client), as I can have my area boundary lines independent to where the walls are. I.e: in the middle of the wall and so on... However, for Passive Fire safety drawings (which I also need to do) my thoughts are to use floor plans as I need to have both sections and plan views. This way, I can use rooms and room tags. If using Area Plans and Area elements, my issue is that unfortunately Areas elements are 2D only.

Re: Area Plans

ZoiStathaki1 — Wed, 14 Dec 2022 06:40:33 GMT

@ToanDN, It seems that my client is asking me to do quite a number of things. One of them is to have opaque Area objects. I have the feeling that Area Plans are default set to transparent..?

Re: Area Plans

ToanDN — Wed, 14 Dec 2022 06:43:06 GMT

@ZoiStathaki1 wrote:

@ToanDN, It seems that my client is asking me to do quite a number of things. One of them is to have opaque Area objects. I have the feeling that Area Plans are default set to transparent..?

Set the Area scheme location to Foreground.

Re: Area Plans

ToanDN — Wed, 14 Dec 2022 06:57:23 GMT

@ZoiStathaki1 wrote:

Understood.

@barthbradley could you elaborate a little bit more ? I will do Area Plans to take Area Measurements (which are requested from client), as I can have my area boundary lines independent to where the walls are. I.e: in the middle of the wall and so on... However, for Passive Fire safety drawings (which I also need to do) my thoughts are to use floor plans as I need to have both sections and plan views. This way, I can use rooms and room tags. If using Area Plans and Area elements, my issue is that unfortunately Areas elements are 2D only.

Your question is "I would like to take measurements for client such as Gross Sellable Area, Gross Buildable Area, and Gross Floor Area." For those, you use three different Area schemes to create three different set of Area plans.

It does not mean you don't have floor plans. You still have floor plans and the models normally.