topic Apply a reveal on wall cross section with help of dynamo in Revit Architecture Forum

Apply a reveal on wall cross section with help of dynamo

Anonymous — Wed, 01 Feb 2023 21:58:50 GMT

Hi community,

Hope you all are doing great!!

This is my first post.

Here is my question:-

"Can we create a sweep/reveal on the cross section of a wall with/without Dynamo script? ;If yes, I will be more than happy to get ideas on HOW? "

Please see the images to understand the shape and senario.

Thanks!

Re: Apply a reveal on wall cross section with help of dynamo

barthbradley — Thu, 02 Feb 2023 00:15:25 GMT

@Anonymous wrote:
Can we create a sweep/reveal on the cross section of a wall

Why? What's this approach accomplish over modeling sweeps the typical way?

Re: Apply a reveal on wall cross section with help of dynamo

ToanDN — Thu, 02 Feb 2023 02:00:26 GMT

@Anonymous wrote:

"Can we create a sweep/reveal on the cross section of a wall with/without Dynamo script?

Not understanding.

Please see the images to understand the shape and senario.

No image.

No image.

Re: Apply a reveal on wall cross section with help of dynamo

Anonymous — Thu, 02 Feb 2023 06:05:32 GMT

Sorry,here are the images

Re: Apply a reveal on wall cross section with help of dynamo

barthbradley — Thu, 02 Feb 2023 18:10:56 GMT

Looks like you want to cut the ends at an angle. You can get the with a void cut, assuming it's a System Family Basic Wall. Model the Void In-Place, Cut the Wall, and press Finish to exit In-Place Sketch Mode. Bada bing.

Re: Apply a reveal on wall cross section with help of dynamo

barthbradley — Fri, 03 Feb 2023 06:36:18 GMT

Actually, isn't this what's going on in that photograph?