topic Re: Two Separate Building Pads Problem in Revit Architecture Forum

Two Separate Building Pads Problem

cakir.omertr — Thu, 04 May 2023 22:46:41 GMT

Hello everyone!

I have a building on a slope with a basement. I need to remove the soil that is getting inside the building. I used a building pad to remove the soil but because of the slope, I used 2 separate pads. But for some reason whenever the edges of the pads touch each other, it causes some graphical error or something like that on the section. Also, both of these pads are on different levels. One of them is on a higher level than the other.

Does anyone know how to fix this issue? (According to the images I uploaded, blue and yellow lines show my pads and the red line shows my section error.)

Re: Two Separate Building Pads Problem

barthbradley — Fri, 05 May 2023 00:39:49 GMT

Post the file and we'll fix it.

Re: Two Separate Building Pads Problem

cakir.omertr — Fri, 05 May 2023 00:56:09 GMT

Here it is!

Re: Two Separate Building Pads Problem

barthbradley — Fri, 05 May 2023 00:55:57 GMT

Must have fell through the cracks. Nothing on my end.

Re: Two Separate Building Pads Problem

cakir.omertr — Fri, 05 May 2023 01:06:36 GMT

So do you have any suggestions for it or is this some other kinda problem?

Re: Two Separate Building Pads Problem

barthbradley — Fri, 05 May 2023 01:26:18 GMT

Deleting the tan subregion fixes it.

Re: Two Separate Building Pads Problem

barthbradley — Fri, 05 May 2023 01:33:59 GMT

All you have to do is edit and modify the sketch boundary of the tan subregion. Use the Offset Tool with "Copy" unchecked to inset the sketch boundary linework a bit.

Re: Two Separate Building Pads Problem

cakir.omertr — Fri, 05 May 2023 17:45:05 GMT

Thanks for the help!