topic Re: Hello. Can you please tell me why the girder is not connected to other elements? She must cut out her volume. But she is superimposed everywhere in Revit Architecture Forum

Hello. Can you please tell me why the girder is not connected to other elements? She must cut out her volume. But she is superimposed everywhere

lilya.barsukova.01 — Tue, 16 May 2023 07:32:57 GMT

Re: Hello. Can you please tell me why the girder is not connected to other elements? She must cut out her volume. But she is superimposed everywhere

kostask_oionei — Mon, 15 May 2023 10:13:53 GMT

Hi,

You have to run the command "Join Geometry" from tab Modify and click the beam and the floor (the order doesn't matter).

If the join is not the desirable after Join Geometry you have to run the command "Switch Join Order"

and click again the beam and the floor (the order doesn't matter also).

Re: Hello. Can you please tell me why the girder is not connected to other elements? She must cut out her volume. But she is superimposed everywhere

lilya.barsukova.01 — Mon, 15 May 2023 10:53:44 GMT

"join" is not active at all when pointing at the girder

Re: Hello. Can you please tell me why the girder is not connected to other elements? She must cut out her volume. But she is superimposed everywhere

barthbradley — Mon, 15 May 2023 13:10:23 GMT

Post the file so we can see.

Re: Hello. Can you please tell me why the girder is not connected to other elements? She must cut out her volume. But she is superimposed everywhere

ToanDN — Mon, 15 May 2023 15:13:19 GMT

Edit the family and set the 3d element to be visible for all detail levels (coarse, medium, and fine). You may also need to set the material behaviour to other.

Re: Hello. Can you please tell me why the girder is not connected to other elements? She must cut out her volume. But she is superimposed everywhere

lilya.barsukova.01 — Tue, 16 May 2023 07:37:18 GMT

I didn't understand about the meaning of the material. What should I put up specifically? I've set up everything else. Family file attached.

Re: Hello. Can you please tell me why the girder is not connected to other elements? She must cut out her volume. But she is superimposed everywhere

lilya.barsukova.01 — Tue, 16 May 2023 07:35:43 GMT

Family file attached

Re: Hello. Can you please tell me why the girder is not connected to other elements? She must cut out her volume. But she is superimposed everywhere

ToanDN — Tue, 16 May 2023 10:06:17 GMT

Try this.

Re: Hello. Can you please tell me why the girder is not connected to other elements? She must cut out her volume. But she is superimposed everywhere

lilya.barsukova.01 — Tue, 16 May 2023 10:28:08 GMT

anyway... does not define for connection

Re: Hello. Can you please tell me why the girder is not connected to other elements? She must cut out her volume. But she is superimposed everywhere

lilya.barsukova.01 — Tue, 16 May 2023 11:09:03 GMT

I'm sorry. Wrong. Works! What changed? Tell me please

Re: Hello. Can you please tell me why the girder is not connected to other elements? She must cut out her volume. But she is superimposed everywhere

lilya.barsukova.01 — Tue, 16 May 2023 11:14:58 GMT

Noticed. Very strange, edited when you said but nothing happened. Apparently the nested family was loaded incorrectly. Thank you very much!!!

Re: Hello. Can you please tell me why the girder is not connected to other elements? She must cut out her volume. But she is superimposed everywhere

ToanDN — Tue, 16 May 2023 14:45:31 GMT

I changed your family exactly as I described in an earlier post.