topic Re: Regions - fill patterns to follow a curved line in Revit Architecture Forum

Regions - fill patterns to follow a curved line

alex_lakin_2001 — Thu, 29 Jun 2023 15:14:51 GMT

Doing a circular point of interest in a garden created by stone blocks (circle of stone blocks instead of image attached).

Apparently in other BIM software you can get it so that the filled region can follow the curved line.

I thought repeating design components might be able to follow the line but I cannot pick a curved line.

Is there a way to manipulate a region to get the design effect or is the solution to create a design component and manually do it?

Re: Regions - fill patterns to follow a curved line

barthbradley — Thu, 29 Jun 2023 16:23:38 GMT

Repeat adaptive components.

https://help.autodesk.com/view/RVT/2023/ENU/?guid=GUID-A720D16F-4C5A-406C-979E-0C4C1095AC61

https://www.youtube.com/watch?v=-qiyN3XrqyY

Re: Regions - fill patterns to follow a curved line

barthbradley — Thu, 29 Jun 2023 17:20:18 GMT

Re: Regions - fill patterns to follow a curved line

ToanDN — Thu, 29 Jun 2023 19:37:07 GMT

You can use a curtain wall or a railing.

Re: Regions - fill patterns to follow a curved line

alex_lakin_2001 — Fri, 30 Jun 2023 08:37:16 GMT

Thank you for this.

I think this would have worked for me however, I only have access to Revit LT and I believe autodesk has not allowed the LT version to be able to create adaptive families.

Re: Regions - fill patterns to follow a curved line

ToanDN — Fri, 30 Jun 2023 10:49:12 GMT

LT can do curtain walls and railings. What you are trying to do can be done easily with either of these tools.