topic Re: Error 1- staircase personal draft in Revit Architecture Forum

Error 1- staircase personal draft

mzmaso90 — Thu, 06 Jul 2023 17:04:51 GMT

I design the perimeter from staircase underneath dwg to build my own staircase, by which, for the particular shape of the wall structurals along the path, should probably be better as solution. Which trick would be beneficial to solve Error 1 in designing with personal shape ?

Thank you in advance.

Best Regards

Re: Error 1- staircase personal draft

mzmaso90 — Thu, 06 Jul 2023 17:08:07 GMT

Re: Error 1- staircase personal draft

ralphdenhaan — Thu, 06 Jul 2023 17:15:26 GMT

Hi,

Are your Boundary Lines closed? There must be no gap between them.
The start and end must be a riser line.

Re: Error 1- staircase personal draft

mzmaso90 — Thu, 06 Jul 2023 17:38:33 GMT

I am waiting to attach the linked file, that is bigger than the 71 MB, Well, yes I checked, The start riser and end one are riser lines.

Re: Error 1- staircase personal draft

ToanDN — Thu, 06 Jul 2023 17:38:52 GMT

Model the stair with 3 normal runs + 2 landings, then convert the runs and landings to sketch and edit their shape.

Re: Error 1- staircase personal draft

mzmaso90 — Thu, 06 Jul 2023 17:55:04 GMT

https://we.tl/t-LntMzFdnLh

Re: Error 1- staircase personal draft

ralphdenhaan — Thu, 06 Jul 2023 18:58:01 GMT

Hi,

Check your Base Level and Top Level when placing the stairs. Also when creating with profile pay attention to the boundaries to be closed. The area where you have to pay attention is in the screenshot.

Re: Error 1- staircase personal draft

mzmaso90 — Fri, 07 Jul 2023 08:46:00 GMT

Is always a roulette with these staircases, I remember I checked many times, I think would be better to don't pick lines from dwg but create as simplest as possible. Another doubt: But when decided to give multiple levels of storey it seems You couldn't go back and modify the drawing of the stair. This just because It has being created with an uncorrected plan scheme.

I don't know if its clear what I am saying but attaching the file would be a long procedure..It's just beacuse the screenshot tells me that out from connect levels, ther's no option to go back ( out from undo, of course) and modify drawing.