https://forums.autodesk.com/t5/revit-architecture-forum/baluster-spacing-help/m-p/13889092#M362987 <P>You can see the post that is part of your pattern is clashing with the end post.</P><P>Change the distance from previous for your post in the pattern to 0".</P> Mon, 10 Nov 2025 18:56:05 GMT Mike.FORM 2025-11-10T18:56:05Z https://forums.autodesk.com/t5/revit-architecture-forum/baluster-spacing-help/m-p/13884746#M362925 <P>I am planning out a railing to be applied to stairs/floors. I am currently trying to space it and honestly I feel that I have the spacing exactly right but something foundational is obviously not working here and I am at a loss. Basically, there should be evenly spaced post-like balusters, and in-between those there is a metal grate panel. However, some of these elements are not showing up. One thing I would like to avoid if possible is balusters overlapping with the start and end posts. I am unable to share the file due to NDA, but in general this should be a simple panel/post railing. Although it clearly is not that simple lol.</P> Thu, 06 Nov 2025 20:54:00 GMT https://forums.autodesk.com/t5/revit-architecture-forum/baluster-spacing-help/m-p/13884746#M362925 michael88TDQ 2025-11-06T20:54:00Z https://forums.autodesk.com/t5/revit-architecture-forum/baluster-spacing-help/m-p/13889092#M362987 <P>You can see the post that is part of your pattern is clashing with the end post.</P><P>Change the distance from previous for your post in the pattern to 0".</P> Mon, 10 Nov 2025 18:56:05 GMT https://forums.autodesk.com/t5/revit-architecture-forum/baluster-spacing-help/m-p/13889092#M362987 Mike.FORM 2025-11-10T18:56:05Z