topic Re: Creating sloped edge profile on a solid blend in Revit Architecture Forum

Creating sloped edge profile on a solid blend

geteway2digitalindia — Thu, 07 Aug 2025 11:30:03 GMT

I need to create a sloped edge on a solid blend as shown in sketch...

Void blend is not working..

Please suggest the solution....

Re: Creating sloped edge profile on a solid blend

vitorbortoncello — Thu, 14 Aug 2025 11:58:18 GMT

Hi geteway2digitalindia

Just use extrusion or, if it's a swept blend, edit its profile.

Re: Creating sloped edge profile on a solid blend

mari.shimode — Tue, 26 Aug 2025 04:53:46 GMT

Hi @geteway2digitalindia, did the information provided answer your question? If so, please use Accept Solution so that others may find this in the future.

If you still have the issue, please let us know. Thank you.

Re: Creating sloped edge profile on a solid blend

mari.shimode — Wed, 03 Sep 2025 08:43:36 GMT

Hi @geteway2digitalindia, since the community found @vitorbortoncello's reply useful, I have marked it as an accepted solution so others who have the same question can refer to it in the future.