Design options wall joint issues

Anonymous — Tue, 07 Dec 2010 02:04:48 GMT

Hi all,

Using design options and having problems with wall joints. I am working on some interior schemes and they are similar as far as wall layouts go. When I copy walls from one design option to another the wall joints on the option that I have newly created are empty, as the walls from the original are interfering with the new option.

Also, although I have walls in both design options, when I move a wall in the new option the original wall moves too, even if I have the original option turned off?

What can I do to avoid this? Please help.

Cheers,

Raoul

Re: Design options wall joint issues

ryan.duell — Tue, 07 Dec 2010 22:07:58 GMT

Please let me know if you are able to do the following in a new project as an example workflow:

1. Create 1 Option Set, then a few options inside.

2. Draw some walls in the main model design option.

3. Then add walls in each option under the set you created.

4. The walls in each set should not interact with the walls in the other set.

Video Example: http://screencast.com/t/xlJiNEoU

Within the same option set, the walls in one option should not attempt to clean up with walls in another option. Are you able to reproduce this default behavior?

Thank you,