topic Join Wall in Revit Architecture Forum

Join Wall

GHASEM_ARIYANI — Mon, 09 Sep 2013 06:12:50 GMT

I want Wall Arch Picture below With Side walls Join But it does not connect properly and reasonably
Please help if you can.

Attache Join Wall.rvt and Saved Revit 2014

Re: Join Wall

Anonymous — Mon, 09 Sep 2013 07:05:13 GMT

Try joining the two walls then modifying function of wall layers 1, 2 , 6 & 7...

Re: Join Wall

GHASEM_ARIYANI — Mon, 09 Sep 2013 07:19:09 GMT

Thank you for the reply .But there is a problem.

See the picture below.

Re: Join Wall

Anonymous — Mon, 09 Sep 2013 07:22:30 GMT

Depending on the scale of your drawing on the sheet that may not be seen???... bigger fish to fry

Re: Join Wall

GHASEM_ARIYANI — Mon, 09 Sep 2013 07:26:31 GMT

However, this should not There is Solutions must be found for.

Cost estimates are wrong because.

Re: Join Wall

constantin.stroescu — Mon, 09 Sep 2013 07:51:13 GMT

a workaround can be to make a: Component > Model in Place > Family Category and Parameters > Walls >Name > Extrusion - make a Void and Cut the extra wall with it....

Re: Join Wall

GHASEM_ARIYANI — Mon, 09 Sep 2013 08:11:06 GMT

Dear Friend

I know But I want to know Is there a way to have their walls This situation can be corrected Model-In-Place and need not