https://forums.autodesk.com/t5/revit-architecture-forum/stretching-multiple-objects-types/m-p/5531402#M339372 <P>My issue would or I should say "will" be when I have a completed floor plan with irregular shaped rooms that do not have all walls or Objects connected to the corridor wall. as well as any line work or Hatch fills or&nbsp;furnishings, text notes and so on. This happens on a&nbsp;regular basis and there is only one tool in ACA that is effective for this type of constant revision. it is the multiple stretch tool which I use the CP command to accomplish.</P><P>&nbsp;</P><P>So its sounding like I will have to window select or pick add to collect all effected entities then input the move by a reference line? or input the&nbsp;measurement to be moved? The Revit&nbsp;approach to drafting is "very very" different from ACA, so some of the simplest&nbsp;answers I have found have just never&nbsp;occurred to me.</P><P>&nbsp;</P><P>I should mention again that a typical Mill layout are between 30 - 60k SF per floor, so that would be just too many things to pick individually. Im sure I'm just missing something as I'm just learning the program.</P><P>&nbsp;</P><P>Thanks</P><P>Todd</P><P>&nbsp;</P><P>&nbsp;</P><P>&nbsp;</P> Fri, 06 Mar 2015 18:03:37 GMT Anonymous 2015-03-06T18:03:37Z