Scheduling the areas and rooms in an apartment building

catherineGLR6T — Mon, 14 Dec 2015 18:20:55 GMT

Hi,

We have several apartment buildings in a project and are required to produce a schedule that looks like this.

										BALCONY
APT NO	LEVEL	APT AREA	Agg.LIVING	WIDTH OF	BED 1	BED 2	BED 3	STORAGE	BALCONY	DEPTH
			AREA Sq.M	LIV/DIN/KIT				Sq.M	Sq.M	M

There are 2 problems with this - 1) getting the gross area of each apartment to appear in the room shcedule and 2) getting the room schedule to list the rooms horizontally, not vertically. We can enter the dimensions for the width of living room and width of balcony manually if required. We have come up with a solution to the 1st problem but we still can't get the data output in the correct format.

There was a post from May 9th 2013 which indicated how to place a 'data collector' family in each group of apartments. And it mentioned that the data collector could be used to push data back from the schedule to the family within the group. Can this family be a table that resembles the table above that that has each cell linked to a room tag?

Or perhaps there's simply a way to format the room schedule to look like this table?

If anyone has any suggestions I'd appreciate you sharing them very much.

Thanks,

Catherine

Re: Scheduling the areas and rooms in an apartment building

BIMAbhi — Thu, 24 Dec 2015 04:35:26 GMT

Add additional shared parameter and add value as per your requirement in your project to generate your custom schedule.

topic Scheduling the areas and rooms in an apartment building in Revit Architecture Forum

Scheduling the areas and rooms in an apartment building

Re: Scheduling the areas and rooms in an apartment building