topic Re: Passing Through Elevation on Revit 2024 in Revit Architecture Forum

Passing Through Elevation on Revit 2024

JOESQUEDAC — Mon, 04 Dec 2023 14:30:30 GMT

Hi. I'm looking for the Passing Through Elevation on Revit 2024. Previous versions has the option on Toposurface settings, but now there is no option to configurate passing elevation through en Toposolid settings on Revit 2024. Can help me?

Re: Passing Through Elevation on Revit 2024

barthbradley — Mon, 04 Dec 2023 14:39:49 GMT

https://help.autodesk.com/view/RVT/2023/ENU/?guid=GUID-F56B56F0-E729-4A8B-A4CD-9664EF0EAC6D

Re: Passing Through Elevation on Revit 2024

JOESQUEDAC — Mon, 04 Dec 2023 16:46:34 GMT

Yes, but I need the Passing through elevation setting

Re: Passing Through Elevation on Revit 2024

barthbradley — Mon, 04 Dec 2023 16:53:11 GMT

That dialog box doesn't exist in 2024.

Re: Passing Through Elevation on Revit 2024

barthbradley — Mon, 04 Dec 2023 17:15:31 GMT

Re: Passing Through Elevation on Revit 2024

JOESQUEDAC — Mon, 04 Dec 2023 17:42:06 GMT

The real problem is that without option, I can't start Label Contours with closed numbers. Any idea to solve this problem? (In photo, look at the primary contours. There are not closed numbers)

Re: Passing Through Elevation on Revit 2024

barthbradley — Mon, 04 Dec 2023 17:52:00 GMT

Contour elevations are relative to the Elevation Base. You could use a Relative Base.

....just to be clear; by "closed" you mean whole numbers? If so, why not raise the Elevation Base 0.30 or lower the Toposolid 0.30?

Re: Passing Through Elevation on Revit 2024

JOESQUEDAC — Mon, 04 Dec 2023 19:28:28 GMT

Where is the Elevation Base option?

Re: Passing Through Elevation on Revit 2024

JOESQUEDAC — Mon, 04 Dec 2023 19:29:28 GMT

Yes, I mean whole numbers, but where is the Elevation Base option?

Re: Passing Through Elevation on Revit 2024

barthbradley — Mon, 04 Dec 2023 23:07:55 GMT

Under the Type Properties of the Contour Labels.

But, if those numbers are still not whole numbers when choosing a different Elevation Base, then you need to move the Toposolid down until it zeros out (e.g. 0.30 down if the Elevation Base is unchanged from the one used in the above screenshot). Or, like I said, move the Elevation Base up 0.30 in this case.

Re: Passing Through Elevation on Revit 2024

JOESQUEDAC — Tue, 05 Dec 2023 17:27:22 GMT

The result is the same but with different numbers, they don't changes to whole numbers. Neither the contour label does not change even when I move the toposolid. The reference is always +0.30

Re: Passing Through Elevation on Revit 2024

barthbradley — Tue, 05 Dec 2023 17:39:58 GMT

That doesn't make any sense unless your Contour Display values (under the Properties of the Toposolid) are not whole numbers.

Post you Project File and I'll look at it and see what's going on.

Re: Passing Through Elevation on Revit 2024

barthbradley — Tue, 05 Dec 2023 17:41:34 GMT

Use Survey Point for Elevation Base, then move the CLIPPED Survey Point up or down in Elevation.

Re: Passing Through Elevation on Revit 2024

ToanDN — Tue, 05 Dec 2023 18:44:34 GMT

Edit Toposolid type > Edit Contour Display.

Re: Passing Through Elevation on Revit 2024

JOESQUEDAC — Tue, 05 Dec 2023 20:38:41 GMT

But I already defined the toposolid with real geoposition an altitude using the Survey Point. The logical thing would be to show curves with closed numbers, right? Define label conturs like the previous Passing Through Elevation setting at least. Contour display control is setting on -100, 1000.

Re: Passing Through Elevation on Revit 2024

barthbradley — Tue, 05 Dec 2023 20:58:16 GMT

Is the base of the Toposolid on the Survey Point ORIGIN? Go to Elevation, Unclip the Survey Point and enter 0,0,0 into its x,y,z Coordinates, Isolate the Survey Point and Toposolid in the View and zoom in on the base of the Toposolid at and Survey Point/Origin. I'm betting the Toposolid Base is not intersecting with the Survey Point Origin, but slightly above it.

Re: Passing Through Elevation on Revit 2024

JOESQUEDAC — Tue, 05 Dec 2023 22:47:19 GMT

No becuase my physical reference point is 1.00 m over the ground. I tried moving up and down first the toposolid, after the survey point but the result is always the same: primary contours show decimals

Re: Passing Through Elevation on Revit 2024

barthbradley — Tue, 05 Dec 2023 23:34:40 GMT

Just post your RVT here. That's the quickest way to resolve.

Re: Passing Through Elevation on Revit 2024

barthbradley — Tue, 05 Dec 2023 23:44:56 GMT

Or, if you just want to fake until you make it, change the formatting. 😉

Re: Passing Through Elevation on Revit 2024

ToanDN — Wed, 06 Dec 2023 03:00:59 GMT

@JOESQUEDAC wrote:

But I already defined the toposolid with real geoposition an altitude using the Survey Point. The logical thing would be to show curves with closed numbers, right? Define label conturs like the previous Passing Through Elevation setting at least. Contour display control is setting on -100, 1000.

Change Inicio to 100.20.