topic Re: Creating a filter: Filter Rules in Revit Architecture Forum

Creating a filter: Filter Rules

Anonymous — Wed, 30 Mar 2016 08:05:05 GMT

I am trying to hide th egrids by filtering the grids here and I have done it before but I dont know why it doenst work here anymore. I have checked teh phasing as well. I have also checked all then unckeked the grid but still no response.

Re: Creating a filter: Filter Rules

josemukalel — Wed, 30 Mar 2016 08:27:32 GMT

Re: Creating a filter: Filter Rules

RDAOU — Wed, 30 Mar 2016 10:14:15 GMT

@Anonymous

You already have the Filter box open; already unchecked all and you have only the Grids Checked! You just need to

Click OK to close the filter box (The filter/response occures after you click OK)
Right click over one of the selected/filtered grids and select Hide in View > Elements

Re: Creating a filter: Filter Rules

constantin.stroescu — Wed, 30 Mar 2016 12:19:10 GMT

if you want to make a more refined selection of what to show and what not , I suggest to use a View Filter :View > Graphics >Filter by Defined Criteria- Categories>Grid.

Use Filter Rules to control what is seen and what not..

Then from VGO >Filters>Add - load the defined fillter for grids and play with the Visibility by checking/unchecking it..

By this method you can use the Filter to many views and can choose what to show and what not...