topic Re: No Auto Route Solution Found in Revit Architecture Forum

No Auto Route Solution Found

Anonymous — Mon, 06 Jun 2016 15:00:12 GMT

Hi all. I am trying to connect one pipe at 90 degrees with one I have already placed. I am seeing this error, cannot move forward..

I attach screenshots and file, thanks!

RDAOU — Mon, 06 Jun 2016 15:50:21 GMT

@Anonymous

That error usually occurs when

the connection fittings are not defined (applies to pipe/tray/duct systems)...You need to define those fittings for the type of pipe you are using
OR (when you have the necessary fittings already loaded) when there is a lack of necessary space to place the specified connecting fitting.

To do so...

Start the Pipe from the ribbon
On the properties Palette >> go to Edit Type
Under Segments & Fittings >> Routing Pref. >> Click Edit
On the following Dialog >> Click Load family >> Navigate to the Pipes Folder and load the type of fittings to suit the pipes you are using
Once loaded >> Assign the matching family to the right fitting from the drop down menus then set the Min.
Click Ok twice to get back tot he view

You should now be able to route the system Vertically and horizontally

Edit: Screencast

bnelsonYWCWP — Thu, 04 May 2023 22:13:45 GMT

THANKS SO MUCH FOR THIS, TOOK A FEW HOURS AND THIS FINALLY GAVE THE ANSWER OF HOW TO LOAD FITTINGS -ARCHITECTURE GUY

crivera14B — Fri, 11 Oct 2024 15:01:44 GMT

Thank you!