topic Re: revit door family slide and swing in Revit Architecture Forum

revit door family slide and swing

Anonymous — Thu, 06 Oct 2016 14:33:03 GMT

Hi i am looking for some one to write a door family for a slide and swing door (see panoramic doors) is there any one out there who thinks they can help i do not have or know anything about revit this would be so we could pass the file onto other customers at request.

regards
Tristan

Re: revit door family slide and swing

FinearcLtd — Thu, 06 Oct 2016 14:36:05 GMT

can you send some kind of technical drawings and pictures to explain what exactly you need?

Re: revit door family slide and swing

Anonymous — Thu, 06 Oct 2016 15:18:26 GMT

Many thanks for the reply the door is the one one the video on this site http://panoramicdoors.co.uk so you can see how it works. As for technical drawings please see below jpg. i can supply full cad drawings if this is required we will be looking for 2,3,4,5 and 6 pane sliding to the left and the same to the right.

regards

Tristan

Re: revit door family slide and swing

FinearcLtd — Thu, 06 Oct 2016 15:48:55 GMT

Dear Tristan,
I believe I can help you build the Revit family you need.
At what level of detailing would you like your Revit family to be? Do you want two types: with wood frame and aluminium frame?
I find your product relevant for my work as an architect in my country as well. Have you a local dealer in Israel? If not, I may be able to put you in touch with a few.
I just hope you are not in a great hurry since I am going away on vacation between 11th-24th of October.
I will be most glad to assist you upon my return. I suppose It should take about a week to build this family.
Kind regards,

Eyal

Architect Eyal Bleiweiss

Finearc Architects Ltd. www.fa-arch.com<>
Cellular 972-54-4215204 Tel 972-77-7867861/2
31a Hatchelet Street Hod Hasharon 4526461 Israel

Re: revit door family slide and swing

Anonymous — Fri, 07 Oct 2016 10:46:20 GMT

Hi Eyal

As it stand we currently do not have a supplier in Israel and i think my boss would like to talk to you about this in the future. As for the door family i think just the aluminium at the moment as for the detailing i am not show what you mean as far as i can tell i think it would need to be detailed enough to identify the system but other than that i would rely on your expertise in this matter. My boss has also ask for a basic idea on the costing for you to do this for us and what you would need from us.

regards

Tristan

Re: revit door family slide and swing

FinearcLtd — Sat, 08 Oct 2016 06:37:08 GMT

No cost. This is the whole idea of the forum community. I help you now! You pass it on to somebody else.
I will need dwg file with plan and section detailing, including wall joint working details. Table of min. & Max. Sizes of panels and openings.

sent from Eyal Bleiweiss
Finearc Architects Ltd

Re: revit door family slide and swing

Anonymous — Mon, 10 Oct 2016 09:28:26 GMT

Thank you for your reply i will send over all the info you need by end of friday (uk)

Re: revit door family slide and swing

Anonymous — Thu, 13 Oct 2016 12:45:03 GMT

I think i have attached all you need in the dwg there is a 2 and 3 pane plan just so you can see how they change with increasing sashes. As for wall fixing they fix through the centre of each touching section so as long as there is a sound wall behind they can be located where needed for the regulations.

Any thing else please contact me and i will get it to you asap

Regards

Tristan

Re: revit door family slide and swing

Anonymous — Fri, 11 Nov 2016 11:47:07 GMT

Hope all is well i was just wondering how the family for the door is coming along?

regards

Tristan

Re: revit door family slide and swing

FinearcLtd — Sat, 03 Dec 2016 21:17:01 GMT

Hello Tristan,

Sorry for the long delay. I was very busy lately.

Please fine attached the files for you system.

Parameters need to be defined yet for the specifications.

Please let me know which parameters you require and I will add them.

Test the Revit Family and see if you get the hang of it. 3-8 shashes in one family and 2 shashes in another for parametric reasons.

I attached an image of the sample project for your knowledge.

let me know if you anything else.

Eyal

Re: revit door family slide and swing

FinearcLtd — Mon, 12 Dec 2016 12:13:18 GMT

Hi again Tristan,

Did you get the family I posted?

I attach a correction to the one I sent. there was a misspelling in the word sill which for some reason was spelled seal.

Let me know if this answers your needs.

Eyal Bleiweiss

Finearc Architects

Re: revit door family slide and swing

Anonymous — Mon, 12 Dec 2016 12:18:10 GMT

Many thanks for the file as we do not have Revit our selves it is being looked at by the person that requested it in the first case

I will get back to you when i get a reply

thanks again

Tristan