topic Add Level info to Topography Scedule for each pad in Revit Architecture Forum

Add Level info to Topography Scedule for each pad

Anonymous — Mon, 24 Oct 2016 09:47:24 GMT

Hi,

I cannot find a way to add the level info to the topography schedule.

Schedule nicely lists cut and fill volumes but I would like to see at what level the pads are located as well. (Yes, Levels are there at the N/E/W/S elevation views).

Re: Add Level info to Topography Scedule for each pad

BIM.Consultant — Mon, 24 Oct 2016 10:18:30 GMT

Create a new schedule, expand site and choose "Pads". There you will see the option to add the "Level" field.

Re: Add Level info to Topography Scedule for each pad

Anonymous — Fri, 04 Nov 2016 07:31:02 GMT

Thanks a lot. That's great !

Is there a way to get that "level" parameter available in pads schedule into Topography schedule where cut and fill volumes are available or vice-versa ?

Re: Add Level info to Topography Scedule for each pad

BIM.Consultant — Sun, 06 Nov 2016 06:55:39 GMT

Level is a parameter for building pad. Cut/Fill values are for topography. The answer would be no.

But you can create 2 schedules, remove the header from one of them. Then you can make them appear as 1 schedule when you place them on the sheet.

Re: Add Level info to Topography Scedule for each pad

Anonymous — Sun, 06 Nov 2016 11:52:50 GMT

I did that but the look is not nice. You have to enter names twice and make the columns at equal widths so the raws would match etc...

Cut/Fill volumes calculated based on the level entered, so the level is info is there and should be made available to be used in topo schedules.

Hope Autodesk implements that in the future versions.