topic Re: Can't rotate whole project in Revit Architecture Forum

Can't rotate whole project

Anonymous — Tue, 08 Nov 2016 10:35:40 GMT

Hi,

Can anyone help me rotate the whole bridge 90 degress (on the bridge plane)?

I've tried rotating/moving but there are restraints that prevents me from doing it.

I've tried grouping everything up and rotating without success as well.

I've tried following some of the answers in this forum however non of them were success.

What more can I try?

Re: Can't rotate whole project

constantin.stroescu — Tue, 08 Nov 2016 13:15:24 GMT

I think you can do it using Rotate Project North:

Manage >Position>Rotate Project North > Rotate Project - 90 degrees CW or CCW
step 2 : select Toposurface and Rotate it back in the previous position - 90 degrees CCW or CW

Re: Can't rotate whole project

Alfredo_Medina — Tue, 08 Nov 2016 13:20:03 GMT

From a 3d view, select all the model elements
Create a group
Convert the group to a link
Rotate the link
Bind the link
Ungroup the group.
Remove the link.

Re: Can't rotate whole project

semko_dm — Tue, 08 Nov 2016 13:25:18 GMT

Shalom!

Follow this steps: select all elements - filter - uncheck "Mass" (and group of railings) - rotate. Then select all, pick only "Mass" - rotate on the same angle. To Move the bridge, just do the same thing.
To rotate group of railings - ungroup it, rotate and then recreate the group if you need so.
Use reference planes to rotate, and intersection of the planes as the center of rotation.

If my post answers your question, please click the "Accept as Solution" button. This helps everyone find answers more quickly!

Kind regards,
Dmitriy Semko.

Re: Can't rotate whole project

Anonymous — Mon, 23 Jul 2018 20:15:16 GMT

IT WORKS , THANK YOU !!!