topic Re: Family issue in Revit Architecture Forum

Family issue

Anonymous — Sun, 29 Jan 2017 20:47:34 GMT

Hello everyone,

I'm using Revit only a short time. I need an help, please.

I have two problems:

1) in "ANB-RE-A-MODEL-200-00" I have loaded "ANB_PORTA_ANTA SINGOLA_INTERNO_3D" but it doesn't work (the chassis doesn't fit to the various wall thicknesses) - I don't understand why!

2) I need to model the roof of "ANB-RE-A-MODEL-200-00" with the "Profile.dwg" but I don't know what is the best way.

Can someone help me please?

I'm becoming crazy because I don't find a solution.

Thank you so much.

Antonio

Re: Family issue

PijPiwo — Sun, 29 Jan 2017 21:32:13 GMT

@1 - see picture

@2 - in dwg, I’m not sure what I’m looking at. Is it a roof overhang profile? If yes, try to create a fascia profile family with the profile to match cad file and apply to the roof edge in your revit project.

FYI, you don’t need to model in 1:1 scale. It will never gonna fit the sheet. Change the scale to the value you will be actually putting on the sheet when printing. It will be easier to see the annotation and other geometry as well.

Re: Family issue

josemukalel — Mon, 30 Jan 2017 06:08:26 GMT

There is not enough constrains and parameters in the door family.pls watch the screencast

Re: Family issue

josemukalel — Mon, 30 Jan 2017 06:22:18 GMT

I add some constrains ,but before use please modify Width and Height as per your req

Re: Family issue

Anonymous — Mon, 30 Jan 2017 20:48:37 GMT

For the door, now it's clear.

Thank you so much.

Bye.

Antonio

Re: Family issue

Anonymous — Mon, 30 Jan 2017 20:50:08 GMT

I'm going to try for the roof.

Thanks.

Antonio