topic Re: wall joining issue in Revit Architecture Forum

wall joining issue

Anonymous — Wed, 15 Feb 2017 11:07:39 GMT

i have a small section of wall which is having some issues, the wall steps out 200mm and the wall thickness is 300mm so this is causing some graphical issues whats the best way to solve this?

Re: wall joining issue

Joris.vd.Meulen — Wed, 15 Feb 2017 11:25:48 GMT

Hmmm,

I'd say: don't make thick layered walls but seperate walls instead. But that is probably not the question.

Did you try "mitter" as wall join option?

Re: wall joining issue

Anonymous — Wed, 15 Feb 2017 11:31:15 GMT

not tried mitter, so you are also saying i should not use joined walls for this?

Re: wall joining issue

Joris.vd.Meulen — Wed, 15 Feb 2017 12:18:33 GMT

It is possible, for sure, but it needs some special attention ...

I'll upload a screencast in a bit.

Re: wall joining issue

Joris.vd.Meulen — Wed, 15 Feb 2017 12:19:12 GMT

Re: wall joining issue

constantin.stroescu — Wed, 15 Feb 2017 12:29:07 GMT

First,draw the exterior 3 chained walls

Then draw the 4-th interior wall and play a little with Allow/Disallow Join options if necessary...

.....I saw now there was anyway an answer.....