topic Re: Correct hight railing from stairs in Revit Architecture Forum

Correct hight railing from stairs

Anonymous — Mon, 24 Apr 2017 16:47:38 GMT

Hello, to put a stairs with stairs by step the railing on landing is not well anchored.

Tryed to modify dimension with baluster placemnt but don't go well.

Tryed to put as base "top railing and after that the offset to arrived to the landing but even that don't go (att. 3 and 4).

Any ideas?

Thank's

Anonymous — Mon, 24 Apr 2017 16:49:54 GMT

Att with base as top railing with 900 offset.

PijPiwo — Mon, 24 Apr 2017 18:42:54 GMT

Just split the sketch line at the landing.

Anonymous — Mon, 24 Apr 2017 20:57:52 GMT

To allign the balusters and put one of them when begin the slope on left side (att 2)?

PijPiwo — Mon, 24 Apr 2017 23:17:21 GMT

See picture.

Anonymous — Tue, 25 Apr 2017 00:54:36 GMT

If now have what in att 1 ?

Someone can samy what what meaning that underlight in att 2?

Project attachaed

ennujozlagam — Tue, 25 Apr 2017 02:16:11 GMT

@Anonymous hello, check attached file if it is acceptable to you. thanks

PijPiwo — Tue, 25 Apr 2017 12:36:39 GMT

@Anonymous wrote:
If now have what in att 1 ?
Someone can samy what what meaning that underlight in att 2?
Project attachaed

The description of each function is in your help menu - here and here. The best way to learn is to play/experiment with them and see what they do.

Please compare your rail setting with my picture posted in my previous post. Make them the same and funny looking objects will go away.

Anonymous — Tue, 25 Apr 2017 16:28:58 GMT

I think is better but in several rail the total railing from 2 sides and manage these.