topic Re: Wall Assembly Issues in Revit Architecture Forum

Wall Assembly Issues

Anonymous — Sat, 24 Feb 2018 20:10:43 GMT

I originally wanted wood cladding on the interior of my space but now I just want white walls. Here is a screen shot of how my assembly is set up? Any ideas as to why I can't get them to show up?

Re: Wall Assembly Issues

MostafaElashmawy — Sat, 24 Feb 2018 21:55:31 GMT

there is two possibilities:

1- you are drawing the exterior layer at the inside of the building. try selecting the wall and click space to flip it to check the other side.

2- you may have the surface pattern of the paint material similar to that of the Oak.(may be you duplicated the Oak and forgot to edit the graphics section)

Re: Wall Assembly Issues

MostafaElashmawy — Sat, 24 Feb 2018 21:58:01 GMT

after checking your other post, I think the problem is :

you are drawing the exterior layer at the inside of the building. try selecting the wall and click space to flip it to check the other side.

Re: Wall Assembly Issues

Anonymous — Sat, 24 Feb 2018 22:03:33 GMT

Thank-you so much! I have been crying about this for hours. You are a life-save. My boyfriend says thank-you too because he cannot help me and it makes him sad when he is helpless.

Re: Wall Assembly Issues

MostafaElashmawy — Sat, 24 Feb 2018 22:04:59 GMT

You and your boyfriend are welcome.

I hope this also solved your other post about render issue.