topic Re: Material and Decals in Revit Architecture Forum

Material and Decals

Anonymous — Thu, 08 Mar 2018 19:14:26 GMT

Hello,

Would anyone know how I can uniformly put a jpeg image of a pattern that I designed on the cone of this interior. I tried my best to play with the setting but these lines show.

Please help.

Re: Material and Decals

Viveka_CD — Thu, 08 Mar 2018 19:55:12 GMT

Hi @Anonymous

Can you post a screenshot of the settings?

Do you want a bump in the pattern?

Regards,

Re: Material and Decals

Anonymous — Thu, 08 Mar 2018 21:26:34 GMT

Hi Viveka,

I actually modeled the interior in Revit Mass then brought it into Revit Project. I designed a pattern which I then applied to all the walls. For some reason when I apply the pattern to the Cone and the Roof it shows up weird. I dont have a bump in the pattern

Here are the settings

Re: Material and Decals

Anonymous — Thu, 08 Mar 2018 21:31:43 GMT

Here is the revit file of the project

Re: Material and Decals

Anonymous — Thu, 08 Mar 2018 21:32:36 GMT

i also attached the revit file of the project

Re: Material and Decals

Viveka_CD — Thu, 08 Mar 2018 23:28:17 GMT

Hi @Anonymous

The settings are all ok.

A few things to check:

1. Are you sure the pattern you created does not have a black outline or border?

2. Try to make a duplicate and crop the pattern and reassign.

3. Can you select the lines and override the graphics - make them not visible?

4.See article on Aligning the Render Appearance to the Surface Pattern

If none of the above work, can you share the pattern and part of the model so I can test further. I can share a private folder if you'd prefer.

Regards,

Re: Material and Decals

Viveka_CD — Thu, 08 Mar 2018 23:33:14 GMT

Hi @Anonymous

Please share the pattern as well, and let me know how you would like this to appear?

Regards,

Re: Material and Decals

Viveka_CD — Fri, 09 Mar 2018 15:04:37 GMT

Hi @Anonymous

I see that you have marked the solution. Just checking if the recommendations helped resolve your issue?

Let me know if you have additional questions and good luck with your project.

Regards,