topic Re: Help with site plan in Revit Architecture Forum

Help with site plan

Anonymous — Thu, 19 Apr 2018 17:19:42 GMT

I have to create a site according to the attachment shown below. My issue is, the whenever I go to change the elevation it is not showing up correctly. I'm just not sure what I'm doing wrong..

Thanks

Re: Help with site plan

ToanDN — Thu, 19 Apr 2018 17:24:01 GMT

@Anonymous wrote:

I have to create a site according to the attachment shown below. My issue is, the whenever I go to change the elevation it is not showing up correctly. I'm just not sure what I'm doing wrong..

Thanks

What do you mean? Changing the elevation of the topo points?

Re: Help with site plan

barthbradley — Thu, 19 Apr 2018 17:32:33 GMT

Odd. How are you navigating to an Elevation View? Via the Project Browser or the View Cube?

...Ha! Yah, I guess you could read it that way too, @ToanDN.

Re: Help with site plan

Anonymous — Thu, 19 Apr 2018 17:59:52 GMT

@barthbradleywrote:
Odd. How are you navigating to an Elevation View? Via the Project Browser or the View Cube?

...Ha! Yah, I guess you could read it that way too, @ToanDN.

It's showing this no matter which way I navigate it.

Re: Help with site plan

Anonymous — Thu, 19 Apr 2018 17:58:25 GMT

Yes. So to clarify, I started by creating an elevation of 0 around the building, then one of -20. The initial view is not looking correct to me, so I'm at a stop.

Re: Help with site plan

barthbradley — Thu, 19 Apr 2018 18:05:16 GMT

So this IS about the Elevation View itself? How did you create it in the first place? Go to View Tab and select Elevation?

...sorry @Anonymous, but from reading your latest post, it seems @ToanDN was on the right path. Sounds like you're modifying the elevation of the points inside Toposurface sketch mode, and not getting the results you want upon closing out of sketch mode. Is this correct?

Re: Help with site plan

Anonymous — Thu, 19 Apr 2018 18:04:14 GMT

No, it's a massing and site issue.

Re: Help with site plan

ToanDN — Thu, 19 Apr 2018 18:09:39 GMT

@Anonymous wrote:

Yes. So to clarify, I started by creating an elevation of 0 around the building, then one of -20. The initial view is not looking correct to me, so I'm at a stop.

Do you want to see more contour lines on the elevation, see deeper, see a larger extent of the elevation?

Re: Help with site plan

Anonymous — Thu, 19 Apr 2018 18:10:46 GMT

Right,sorry. I don't know really know how to get the results for the image I've attached.

Re: Help with site plan

Anonymous — Thu, 19 Apr 2018 18:16:37 GMT

Thanks for your help, I changed the details you've shown but the issue still remains. It didn't seem to have an affect.

Re: Help with site plan

ToanDN — Thu, 19 Apr 2018 18:26:16 GMT

Re: Help with site plan

Anonymous — Thu, 19 Apr 2018 18:31:12 GMT

Very strange. It's set to that already as well/

Re: Help with site plan

ToanDN — Thu, 19 Apr 2018 18:38:20 GMT

Can you share the file?

Re: Help with site plan

Anonymous — Thu, 19 Apr 2018 18:47:33 GMT

@ToanDNwrote:
Can you share the file?

Attached. Thank you

Re: Help with site plan

ToanDN — Thu, 19 Apr 2018 19:31:16 GMT

Re: Help with site plan

Anonymous — Fri, 20 Apr 2018 15:44:02 GMT

Thanks so much for your help. I appreciate it. @ToanDN