topic Re: Window Schedule in Revit Architecture Forum

Window Schedule

woodstim — Tue, 24 Apr 2018 04:46:35 GMT

Hi,

I am making some changes to a house I have modelled. I want to show existing, to be demolished and proposed (new) walls and windows etc.

However, in the window schedule, I cant seem to get it to show the proposed windows. Does anyone know how to do this?

I have got the `to be demolished` and existing windows to show on the schedule, but cant get it to show New or proposed.

Also, sometimes when I place windows, I cant see them in my floorplan unless I high light the wall by drawing a box over it. Why is that?

Thanks,

Tim.

Re: Window Schedule

ToanDN — Tue, 24 Apr 2018 04:49:19 GMT

Re: Window Schedule

woodstim — Tue, 24 Apr 2018 05:12:04 GMT

Thanks. but I want to show ALL the windows on the schedule, with either existing, to be demolished or proposed by the side of them. I know I can toggle between them and the schedule will change, but I want all the windows to be listed, weather existing, to be demolished or proposed.

Any help much appreciated.

Thanks,

Tim.

Re: Window Schedule

ToanDN — Tue, 24 Apr 2018 05:15:33 GMT

Re: Window Schedule

woodstim — Tue, 24 Apr 2018 05:37:12 GMT

Thanks, I can do that, but again, you are not showing the NEW windows in the list. I want to show NEW, to be demolished and existing. But there is not an option on the toggle switch for this.

So how can you show New windows in the window schedule along with existing and to be demolished.

Thanks,

Tim.

Re: Window Schedule

woodstim — Tue, 24 Apr 2018 05:38:54 GMT

As you have shown above, you can show Phase created and Phase Demolished, but not New phase??

Re: Window Schedule

barthbradley — Tue, 24 Apr 2018 05:40:35 GMT

Wouldn't you want the schedule phase filter set to "None" then?

Re: Window Schedule

ToanDN — Tue, 24 Apr 2018 05:41:07 GMT

@woodstim wrote:

Thanks, I can do that, but again, you are not showing the NEW windows in the list. I want to show NEW, to be demolished and existing. But there is not an option on the toggle switch for this.

So how can you show New windows in the window schedule along with existing and to be demolished.

Thanks,

Tim.

What do you mean? The first window in the list is an existing window being demolished, the second is an existing to remain, the last one is a new window. What else do you need?

Re: Window Schedule

barthbradley — Tue, 24 Apr 2018 05:44:26 GMT

@woodstimwrote:
...but I want to show ALL the windows on the schedule, with either existing, to be demolished or proposed by the side of them.
Yep, sound like "NONE" is the way to go then.

Re: Window Schedule

woodstim — Tue, 24 Apr 2018 05:46:56 GMT

can you show which one you mean I should set to None? As I have done that and it doesnt seem to work. My proposed windows are still missing in the schedule.

Re: Window Schedule

barthbradley — Tue, 24 Apr 2018 06:07:34 GMT

What do you mean by "proposed" windows. Do you have a phase by that name? Or are you meaning windows that are in a future phase of construction?

...bottom line: what I'm taking about is the phase that the schedule is reporting on. It has a phase setting just like views do. Sounds like you want no ("None") phase filter.

Re: Window Schedule

ToanDN — Tue, 24 Apr 2018 06:17:15 GMT

@woodstim wrote:

can you show which one you mean I should set to None? As I have done that and it doesnt seem to work. My proposed windows are still missing in the schedule.

Set the schedule phase to the last phase of your project, where you created the proposed new window, and set the schedule phase filter to ALL or NONE. If you still can't show them, share the file so I can understand how your phasing is setup.

Re: Window Schedule

woodstim — Wed, 25 Apr 2018 23:38:11 GMT

Ok, ive attached screenshote. So wgat I want is a window schedule that shows all the windows in my house, weather existin, to be demolished or new / proposed. But there is no `All` option in the phase filter for the schedule, so I'm missing windows depending on which one I choose. See below.

So, I would like to see all my windows, 1 to 27 in this case, with the phase listed too. See attached.

Thanks,

Tim.

Re: Window Schedule

barthbradley — Wed, 25 Apr 2018 23:49:27 GMT

Sounds like you don't want phase filtering, so set Phase Filter to NONE. BTW: it's SHOW ALL not ALL.

...on the schedule's properties palette under PHASING category

...I'm looking at your photos and see no schedule. Maybe we're misunderstanding you. Are you talking about Schedules, or trying to show something in the View or on the Tag itself?

Re: Window Schedule

woodstim — Thu, 26 Apr 2018 00:04:50 GMT

Hi, thanks. See attached. You will see the schedule is missing windows. I want to show ALL windows and their phase.

Tim.

Re: Window Schedule

woodstim — Thu, 26 Apr 2018 00:06:13 GMT

is this what I should be changing? See Attached.

Re: Window Schedule

barthbradley — Thu, 26 Apr 2018 00:25:02 GMT

No. If you are truly talking about a Window Schedule (View tab=>Schedules), then look on the Properties Pallet inside a Schedule View itself and you'll see what we're talking about.

...go into the schedule that is shown in your schedule.png above.

...do you mean to create and demolish windows in the same phase?

Re: Window Schedule

ToanDN — Thu, 26 Apr 2018 00:24:49 GMT

Here:

By the way, the highlighted windows below should have been created under Existing phase and Demolished under Proposed phase. What you have there means you installing the new windows and taking them out immediately.

Re: Window Schedule

barthbradley — Thu, 26 Apr 2018 00:42:13 GMT

@ToanDNwrote:
What you have there means you installing the new windows and taking them out immediately.

...or paying a contractor to do nothing.

Re: Window Schedule

woodstim — Thu, 26 Apr 2018 03:23:48 GMT

Hi,

See screenshot attached. I have created the window schedule from view/ schedules.

The schedule Phase filter will only toggle between Existing, To be demolished and proposed. So the schedule then reflects that with the windows it shows. But, I want to show ALL windows in the schedule and weather they are existing, to be demolished or proposed. How do I do that?

Thanks,

Tim.