topic Re: Draw arc in Revit Architecture Forum

Draw arc

Anonymous — Thu, 16 Aug 2018 15:37:05 GMT

Good morining,

trying to draw an arc on east side g my project but I can't.

When finish the skecth Revit say me " boundaries are not satisfied".

On south side instead I got.

See screenshot and .rvt please.

Thank's

Anonymous — Thu, 16 Aug 2018 15:40:24 GMT

. rvt

Anonymous — Thu, 16 Aug 2018 16:13:05 GMT

Can't put the wall in correct position.

Anonymous — Thu, 16 Aug 2018 16:30:16 GMT

When approach the sparrow on the pillar give error

Anonymous — Thu, 16 Aug 2018 16:51:40 GMT

Are you editing the profile of the wall or using the opening tool? In this case I would use a wall based generic model with the opening.

Anonymous — Thu, 16 Aug 2018 17:15:04 GMT

Edit the profile.

How command can I use to do an arc?

Thank's

Anonymous — Thu, 16 Aug 2018 17:43:45 GMT

There is a problem between the wall of the angle.

Anonymous — Thu, 16 Aug 2018 17:55:12 GMT

@ToanDN can you help me please?

ToanDN — Thu, 16 Aug 2018 17:56:56 GMT

I would follow @Anonymous advice.

Anonymous — Thu, 16 Aug 2018 18:01:54 GMT

With which command?

Opening wall?

Anonymous — Thu, 16 Aug 2018 18:06:07 GMT

Just copy one of your other walls that has the edited profile...Wall opening is square only....you would have to use a wall based family.

ToanDN — Thu, 16 Aug 2018 18:11:46 GMT