topic Re: Topography not being generated when exporting IFC in Revit Architecture Forum

Topography not being generated when exporting IFC

sam.stibbs — Thu, 24 Jan 2019 13:06:06 GMT

I am unable to get the topography within my models to export when exporting to an IFC file format.

I have checked in the IFC options and it is set to export and tried changing the default export name but to no avail.

Any ideas on why this may be happening?

Re: Topography not being generated when exporting IFC

Viveka_CD — Thu, 24 Jan 2019 15:15:57 GMT

Hi @sam.stibbs

Can you share a file to test further?

Regards,

Re: Topography not being generated when exporting IFC

sam.stibbs — Thu, 24 Jan 2019 15:27:43 GMT

Sure, please find attached.

For reference I am using Revit 2018.3

Re: Topography not being generated when exporting IFC

barthbradley — Thu, 24 Jan 2019 17:45:41 GMT

I was able to export your RVT to IFC and then open it intact in IFC Template. I did notice that your Survey Point and Project Base Point are separated from one another by a great distance. 179 miles. Revit has a limit of 20 miles. This could be related to your issue. Close the gap and try Exporting to IFC again.

Re: Topography not being generated when exporting IFC

Viveka_CD — Thu, 24 Jan 2019 21:52:57 GMT

@sam.stibbs

Please confirm if you use this exporter: https://apps.autodesk.com/RVT/en/Detail/Index?id=6193770166503453647&appLang=en&os=Win64

Als post a screenshot of your export settings.

Thanks for sharing the file and let us know if the recommendation by @barthbradley helped with your issue.

Thank you @barthbradley

Regards,

Re: Topography not being generated when exporting IFC

Viveka_CD — Thu, 24 Jan 2019 21:59:14 GMT

@sam.stibbs wrote:

Sure, please find attached.

For reference I am using Revit 2018.3

@sam.stibbs Also please update to Revit 2018.3.2 https://knowledge.autodesk.com/support/revit-products/downloads/caas/downloads/content/autodesk-revit-2018-product-updates.html

Thanks,

Re: Topography not being generated when exporting IFC

ToanDN — Fri, 25 Jan 2019 01:14:08 GMT

I exported it using the built-in IFC Exporter and I can see the topo when open the IFC in revit.

Re: Topography not being generated when exporting IFC

sam.stibbs — Fri, 25 Jan 2019 14:55:29 GMT

I only have access through my companies IT to be able to use the in built IFC exporter. Settings export screenshot it is attached.

I don't have any issues with any of the other elements when I have been exporting them to IFC only the topography elements when I bring them into Microstation.

Is there a known issue with Revit version 2018.3.1 is this why you suggest to upgrade?

Re: Topography not being generated when exporting IFC

barthbradley — Fri, 25 Jan 2019 15:01:32 GMT

Con you post a screenshot of the setup (via "Modify Setup")?

...built in exporter worked for me. 2018. Did you try unclipping and moving Survey Point to the Project Base Point?

Re: Topography not being generated when exporting IFC

sam.stibbs — Fri, 25 Jan 2019 15:00:12 GMT

Screenshot attached

Re: Topography not being generated when exporting IFC

barthbradley — Fri, 25 Jan 2019 15:04:11 GMT

Re: Topography not being generated when exporting IFC

sam.stibbs — Fri, 25 Jan 2019 15:34:32 GMT

I had the same in terms of those options you highlighted and tried changing the default name by adding Topography to the end to see if that might change anything but it didn't.

I have also just tried unclipping and moving the survey point to the project base point as suggested and still the same issue.

Re: Topography not being generated when exporting IFC

barthbradley — Fri, 25 Jan 2019 15:50:51 GMT

how about Topo as IfcSite?

https://merlijnvanleeuwen.wordpress.com/2017/03/05/overview-of-ifc-class-names-supported-in-revit/

Re: Topography not being generated when exporting IFC

ToanDN — Fri, 25 Jan 2019 17:36:31 GMT

I exported using the default settings below. Didn't have to change a thing.

Re: Topography not being generated when exporting IFC

Viveka_CD — Fri, 25 Jan 2019 19:22:36 GMT

@sam.stibbs

Can you try as suggested by @ToanDN and let me know if this helps with your issue?

Regards,

Re: Topography not being generated when exporting IFC

sam.stibbs — Mon, 28 Jan 2019 09:15:54 GMT

Ok so it is exporting but onto the IfcSite layer even though the IFC export options have it set to export onto IfcBuildingElementProxy. However, when I then attach it into Microstation it is not appearing?

Re: Topography not being generated when exporting IFC

Viveka_CD — Fri, 08 Feb 2019 20:45:02 GMT

Hi @sam.stibbs

Can you share the files to test further on my end?

Regards,

Re: Topography not being generated when exporting IFC

Anonymous — Sat, 09 Feb 2019 10:59:07 GMT

@sam.stibbs @Viveka_CD

Hello Sam,

I have review your uploaded Revit File. the actual problem in your Revit file is a Toposurface Phase that you have assign in your model.

Please do following steps:

Select toposurface and in properties panel change

Phase Filter : New Construction

Phase Demolished : None

Then After try to export IFC

After Exporting IFC you can change phase again as per your requirement.

Please see attached Capture Image.

Please accept as a solution if it's work.

Thanks

Re: Topography not being generated when exporting IFC

sam.stibbs — Mon, 11 Feb 2019 09:17:25 GMT

Hi,

The settings you said to alter are already like this in the file I uploaded so it doesn't make any difference on the export I still just get the topography border at zero level in Microstation and no contours to it.

Thanks,
Sam

Re: Topography not being generated when exporting IFC

Anonymous — Mon, 11 Feb 2019 09:40:35 GMT

@sam.stibbs

please share your screen with me then only i can clearly understand and do something for you.